Oshkosh, WI 54901
 Phone/Fax 920-231-4000

 sales@smartair.com

 

Car/Lt. Truck Inflator | Truck Tire Inflator | SA-ATV100 | Ball Inflator | Options | Specifications | Accessories

Smart Air ATV Tire Inflators

SA-ATV100

The SMART AIR® SA-ATV100 computer controlled single ATV tire inflation system is for AT25 x 8 - 12 ATV tires and larger.  Smart Air® connects to existing air supply.  Made in the U.S.A.

Operation:  SA-ATV100

Place the locking tire chuck on a properly seated ATV tire’s valve stem.  Select rim size and desired pressure on the keypad.  Select start on the keypad for normal operation.

OR

For units with optional "Repeat" programming:  Select rim size and desired pressure on the keypad.  Select the remote start button to start inflation. When you inflate the next tire, you don’t have to key in the rim size and pressure. Just select the remote start button again, and the tire is inflated to the previous setting. To cancel, press stop.

 

STOP mode:  To stop process, press and hold the STOP key until the system responds.

 
Standard ATV Keypad Layout

Custom programming is available.

Features:

bullet

You can choose up to 16 custom pressure presets.

bullet

Inflates or deflates.

bullet

Numerous built in patented safety features.

bullet

Digitally accurate to ±0.5 PSI.

bullet

Super easy to use.  Just press a button and your job is done!

bullet

Digital read out of pressures, instructions, and error codes.

bullet

Audible tone that signals end of inflation or deflation cycle.

bullet

Reliable, cost effective, high quality.

bullet

Light weight and small size makes installation a snap!

bullet

8” x 6” x 4” enclosure.

bullet

Weight 9 lbs. excluding hoses.

bullet

1 Year Warranty.

 

Specifications:

AIR SUPPLY:  120 PSI maximum supply pressure.  A 100 micron (minimum) filter is required (not included). 

OPERATING TEMPERATURE:  0º C to 40° C.

POWER REQUIREMENTS:  120 VAC, 60 Hz, 0.5 Amp.

SYSTEM REQUIREMENTS:  A 10’ hose and locking tire chuck is included with the SA-ATV100. 

COUPLING:  1/4” female pipe thread connections for the input and output.

Continued product improvement necessitates that Explorer Engineering Corp. reserves the right to modify these specifications without notice.  Explorer Engineering Corp. maintains a program of constant surveillance over all products to ensure a high level of reliability.

Programming Options

 

Accessories

 

 
  Smarter Inflation Solutions...